New England Instrument Co
Stemming Timing

Digital GPS Speedometer

On Sale Now

High quality GPS speedometer for automotive applications

New England Instrument supplies a GPS Speedometer that is quick to install and offers vehicle independent speed readout in vehicles that are not fitted with conventional speedometers.

Using data received from the Global Positioning Satellite network, the GPS Speedometer calculates three-dimensional ground speed and displays it on a clear to read, digital display.

This high technology solution eradicates the dependency on vehicle specific parameters, thereby reducing installation time and eradicating the need for periodic calibration.

Digital GPS speedo

GPS Speedometer with easy to read digital display


Powerful Performance

Designed for harsh automotive environments, the module features 1 inch high, high-brightness green LED digits. Automatic contrast adjustment ensures that the driver is able to read the display in daylight, and is not blinded at night.

The ability to track 12 satellites simultaneously, enhanced receiver sensitivity and active antenna result in fast time-to-first-velocity-calculation as well as the ability to operate in the harshest RF environments such as canyons and cities. Speed errors will occur in RF blackout zones such as tunnels; this is indicated to the driver through a flashing display.

Three dimensional velocity calculations are accurate to 0.2km/h and pulse output rates are updated 4 times per second.

Hummingbird Electronics' GPS Speedometer can be supplied with the readout in kilometers per hour or miles per hour.

A speed dependent switch with high current relay output is available as an option. Both normally-open and normally-closed outputs are provided. Typical applications for the speed switch would be driver over-speed warning or motion detection. Activation speed is user settable.

A maximum-speed recall-switch is available on all models. Press and hold the recall switch for 3 seconds to reset to 0

Side view showing adjustable mount


GPS Speedometer with flexible screw or sucker mount


Rugged Hardware

The GPS Speedometer is supplied in a rugged ABS plastic enclosure with a lexan facia. A fully adjustable dashboard mount stand allows for correct driver orientation. Antenna connection for the active antenna is provided through a gold-plated threaded SMA connector. The active antenna is available in two options:

  • magnetic mount, suitable for mounting in the interior of the vehicle, for example under the dashboard or rear window sill.
  • bulkhead mount, suitable for exterior mount, for example on the roof of the cab.

Power to the unit and switch outputs are provided through six colour coded wires.

For optimum performance, the antenna should be mounted horizontally and upright; and should have a clear view of the sky.

installation is quick and simple

Typical installation of GPS speedo


Download Documentation

Download pdf brochure       download

Download setup instructions       download


Download Free Software

Convert between km/h, mi/h, knots etc.       download

This software converts between popular units of speed

Convert pulse rate to frequency       convert ppk to frequency

This software calculates the output frequency of a speed sender given pulse rate and speed


Performance Specifications

  • Speed range: minimum 2km/h; maximum 199km/h (or 199mi/h)
  • General : 12 channel tracking receiver
  • Update rate: 4Hz
  • Accuracy, horizontal: < 5m (50%), < 8 (90%)
  • Accuracy, altitude: < 10m (50%), < 16 m (90%)
  • Accuracy, velocity: < 0.06m/sec = 0.22km/h
  • Acquisition, after loss of lock: < 2s (90%)
  • Acquisition, first time power applied: < 38s (50%), < 42s (90%)
  • Acquisition, temporary loss of power: < 10s (50%), < 13s (90%)
  • Operational limits, altitude: 18000m
  • Operational limits, Velocity: 300km/h

Electrical Characteristics

  • Input voltage: 10V to 36V
  • Power consumption: maximum 2.5W (200mA @ 12V) – full brightness, including antenna
  • Relay output: 36V max, 4.5A max
  • Battery backup: > 20 days

Physical Characteristics

  • 92mm(width), 66mm(height), 28mm(depth); digit height 1 inch
  • Antenna: 51mm (L), 42mm (W), 14mm (H)
  • Antenna cable length: 3-5m

magnetic mount antenna

Magnetic mount antenna

bulkhead mount antenna

Bulkhead mount antenna

simple rugged mounting option

Optional suction mount


Environmental Specifications

  • Operating temperature: -40oC to +85oC
  • Storage temperature: -55oC to +105oC
  • Humidity: 5% to 95% R.H. non condensing at 60oC

Interface Specifications

Power and pulse output:

  • Red input voltage (10V to 35V)
  • Black ground (0V)
  • Yellow ignition
  • Green normally open
  • Blue normally closed
  • Brown common
RF interface:
  • SMA (compatible connector supplied with antenna)
  • Magnetic mount or bulkhead mount antenna options available

Ordering Information

Part Number Description Price Buy Now
NESSKNIA On Sale Now GPS speedometer with internal antenna $329.00
NESSKRBA GPS speedometer with speed switch, km/h, screw mount, bulkhead antenna $429.98
NESSKNBA GPS speedometer without speed switch, km/h, screw mount, bulkhead antenna $351.56
NESSKRMA GPS speedometer with speed switch, km/h, screw mount, mag-mount antenna $429.98
NESSKNMA GPS speedometer without speed switch, km/h, screw mount, mag-mount antenna $351.56
NESSMRBA GPS speedometer with speed switch, mi/h, screw mount, bulkhead antenna $429.98
NESSMNBA GPS speedometer without speed switch, mi/h, screw mount, bulkhead antenna $351.56
NESSMRMA GPS speedometer with speed switch, mi/h, screw mount, mag-mount antenna $429.98
NESSMNMA GPS speedometer without speed switch, mi/h, screw mount, mag-mount antenna $351.56
NESS-suction Optional windscreen mount $25.62


Contact us

Phone: 02 67658333

Fax: 02 67621181

International Phone: +61 0267658333

International Fax: +61 0267621181

E-Mail: neic@newenglandinstrument.com